In addition to Bronze Passion and Alpine White. We also specified and subsequently supplied the stone required for the ballroom. We suggested Crema Di Carpi and Mira Black as good alternatives to the more oft used combination of Crema Marfil and Emperador from Spain.

Bronze Passion, a relatively new addition to our range, was specified by Richmond International for flooring areas in Adare Manor.

We received an inquiry from Vladimir Djurovic of VDLA early last year to ask for help with an exciting and challenging new project in London. The AKDN in Kings Cross, consisted of a number of gardens. Each garden was to give the feeling and aesthetic of a particular part of the world.  

We are proud to be working with Fletcher Priest on 45 Cannon Street. We are currently in the process of supplying to Bouygues UK, 1100no solid pieces of Urban Grey 128mm thick, that line every window of this new exciting office building in the City.

We worked with W.B. Simpson & Sons Specialist Contractors, Studiolise Designers and Simon Morray Jones Architects on this exciting residential project in West London. A stunning showcase of our material inside and out. The focus for us was on finding the right material for the pool area in the new and expansive basement. This huge space was to house the gym, swimming pool and plunge pool, changing area and bathrooms.

We were asked by Barr Gazettas to recommend natural stone materials for the redevelopment of a Grade II listed building as part of the Crown Estate’s Quadrant scheme off Regent Street.

This months we visited our suppliers quarry and factory near Catania in Sicily. We have an order for 200sqm 600x600x10mm honed tiles and thought it a good time to pop over to see the production.

I always worry a bit when we are ordering large format (ish) tiles in 10mm in a product that may not normally be associated with that particular thickness/format. In this instance the tiles were prepared by firstly trimming the block to a handleable shape and size using a wire saw. Then a large disk was used to cut the strips (not much wider than the 600mm width we needed) that were subsequently honed on a polishing line and finally cut to size on a bridge saw.

This month I visited a factory near Barcelona to check the production of the roof terrace stone destined for the Ludgate Hill project in London. The factory were preparing 500sqm 600x300x30mm flamed Flint Limestone tiles. Fletcher Priest had specified the product and the tiles were to be suspended on pedestals externally.

This week we popped into a factory preparing one of our orders not too far from the Stone Fair we were visiting. The cut to size was well under way.